Original
By certification 
Thin coal seam shearer is used in a coal seam with thickness less than 1.3m(usually 0.8-1.3m)
1. With short fuselage, compact structure and good overall shell rigidity.
2. Using advanced PLC programmable controller, and can achieve remote control.
3. With multi-motor drive and motors are arranged horizontally, which greatly improve the mechanical transmission efficiency.
Following are the basic technical parameters for the thin coal seam shearer:
MAIN TECHNICAL PARAMETER | |||||||
TYPE |
MODEL |
MINING HEIGHT |
MINING DEPTH |
MACHINE HEIGHT |
HAULING FORCE |
HAULING SPEED |
VOLTAGE GRADE |
HYDRAULIC |
MG100-TP |
0.46~0.9 |
10~20 |
370 |
160 |
0~4 |
660 |
MG115-TPD |
0.46~0.9 |
10~20 |
370 |
208 |
0~4 |
660 |
|
ELECTRICAL |
MG100/230-BWD |
0.6~0.8 |
75 |
425 |
220 |
0~4.5 |
1140 |
MG100/258-BWD |
0.9~1.6 |
90 |
660 |
360 |
0~6 |
1140 |
|
MG100/268-BWD |
0.9~1.6 |
90 |
660 |
400 |
0~6 |
1140 |
|
MG132/322-BWD |
0.9~1.6 |
90 |
660 |
360 |
0~6 |
1140 |
|
MG132/332-BWD |
0.9~1.6 |
90 |
660 |
400 |
0~6 |
1140 |
|
MG100/268-BWD |
1~1.5 |
175 |
685 |
450 |
0~6 |
1140 |
|
MG2×65/328-BWD |
0.9~2.2 |
90 |
710 |
440 |
0~6 |
1140 |
|
MG2×80/388-BWD |
0.9~2.2 |
90 |
710 |
440 |
0~6 |
1140 |
|
MG2×100/468-BWD |
0.9~2.2 |
90 |
710 |
440 |
0~6 |
1140 |
|
MG2×100/480-BWD |
1.2~2.5 |
152 |
794 |
540 |
0~7.02 |
1140 |
|
MG2×125/580-BWD |
1.2~2.5 |
152 |
794 |
540 |
0~7.02 |
1140 |
|
Note: Products shall be subject to any changes without additional notices and this products brochure is only for information.
http://www.tensynse.com/
